61 found, showing page 2 of 2
*UNIVERSAL STAIR BASE BRACKET
The GoPro system saves time, money, and headaches. It makes it possible for carpenters, builders and DIY of all skill levels to take on the building of stairs on-site. The secret to the system is the patented pre-stamped measurements on each bracket, which allow the builder to screw the brackets correctly into the wood stringer the first time and without constant measuring or marking. The brackets meet all state building codes and accommodate all rises and runs. The brackets are made from 16-gauge G-185 hot-dipped galvanized steel and can be used inside or outside. The brackets can be used with all types of wood, including treated and artificial wood. The GoPro system saves wood, you can use a 2 x 8 or even a 2 x 6 instead of a 2 x 12. There is minimal cutting of wood, or multiple measuring and marking as you screw in the premarked brackets. It is virtually mistake-proof. There is considerably less chance of squeaking than with conventional stairs. The universal stair bracket is more stable than conventional stringers. And, weight tests conducted by a major North American university demonstrated that our system far exceeded the 300 lb. minimum required in the U.S. For installation
View Details
The GoPro system saves time, money, and headaches. It makes it possible for carpenters, builders and DIY of all skill levels to take on the building of stairs on-site. The secret to the system is the patented pre-stamped measurements on each bracket, which allow the builder to screw the brackets correctly into the wood stringer the first time and without constant measuring or marking. The brackets meet all state building codes and accommodate all rises and runs. The brackets are made from 16-gauge G-185 hot-dipped galvanized steel and can be used inside or outside. The brackets can be used with all types of wood, including treated and artificial wood. The GoPro system saves wood, you can use a 2 x 8 or even a 2 x 6 instead of a 2 x 12. There is minimal cutting of wood, or multiple measuring and marking as you screw in the premarked brackets. It is virtually mistake-proof. There is considerably less chance of squeaking than with conventional stairs. The universal stair bracket is more stable than conventional stringers. And, weight tests conducted by a major North American university demonstrated that our system far exceeded the 300 lb. minimum required in the U.S. For installation
*UNIVERSAL STAIR BRACKET-RIGHT
The GoPro system saves time, money, and headaches. It makes it possible for carpenters, builders and DIY of all skill levels to take on the building of stairs on-site. The secret to the system is the patented pre-stamped measurements on each bracket, which allow the builder to screw the brackets correctly into the wood stringer the first time and without constant measuring or marking. The brackets meet all state building codes and accommodate all rises and runs. The brackets are made from 16-gauge G-185 hot-dipped galvanized steel and can be used inside or outside. The brackets can be used with all types of wood, including treated and artificial wood. The GoPro system saves wood, you can use a 2 x 8 or even a 2 x 6 instead of a 2 x 12. There is minimal cutting of wood, or multiple measuring and marking as you screw in the premarked brackets. It is virtually mistake-proof. There is considerably less chance of squeaking than with conventional stairs. The universal stair bracket is more stable than conventional stringers. And, weight tests conducted by a major North American university demonstrated that our system far exceeded the 300 lb. minimum required in the U.S. For installation
View Details
The GoPro system saves time, money, and headaches. It makes it possible for carpenters, builders and DIY of all skill levels to take on the building of stairs on-site. The secret to the system is the patented pre-stamped measurements on each bracket, which allow the builder to screw the brackets correctly into the wood stringer the first time and without constant measuring or marking. The brackets meet all state building codes and accommodate all rises and runs. The brackets are made from 16-gauge G-185 hot-dipped galvanized steel and can be used inside or outside. The brackets can be used with all types of wood, including treated and artificial wood. The GoPro system saves wood, you can use a 2 x 8 or even a 2 x 6 instead of a 2 x 12. There is minimal cutting of wood, or multiple measuring and marking as you screw in the premarked brackets. It is virtually mistake-proof. There is considerably less chance of squeaking than with conventional stairs. The universal stair bracket is more stable than conventional stringers. And, weight tests conducted by a major North American university demonstrated that our system far exceeded the 300 lb. minimum required in the U.S. For installation
*UNIVERSAL STAIR BRACKET-LEFT
The GoPro system saves time, money, and headaches. It makes it possible for carpenters, builders and DIY of all skill levels to take on the building of stairs on-site. The secret to the system is the patented pre-stamped measurements on each bracket, which allow the builder to screw the brackets correctly into the wood stringer the first time and without constant measuring or marking. The brackets meet all state building codes and accommodate all rises and runs. The brackets are made from 16-gauge G-185 hot-dipped galvanized steel and can be used inside or outside. The brackets can be used with all types of wood, including treated and artificial wood. The GoPro system saves wood, you can use a 2 x 8 or even a 2 x 6 instead of a 2 x 12. There is minimal cutting of wood, or multiple measuring and marking as you screw in the premarked brackets. It is virtually mistake-proof. There is considerably less chance of squeaking than with conventional stairs. The universal stair bracket is more stable than conventional stringers. And, weight tests conducted by a major North American university demonstrated that our system far exceeded the 300 lb. minimum required in the U.S. For installation
View Details
The GoPro system saves time, money, and headaches. It makes it possible for carpenters, builders and DIY of all skill levels to take on the building of stairs on-site. The secret to the system is the patented pre-stamped measurements on each bracket, which allow the builder to screw the brackets correctly into the wood stringer the first time and without constant measuring or marking. The brackets meet all state building codes and accommodate all rises and runs. The brackets are made from 16-gauge G-185 hot-dipped galvanized steel and can be used inside or outside. The brackets can be used with all types of wood, including treated and artificial wood. The GoPro system saves wood, you can use a 2 x 8 or even a 2 x 6 instead of a 2 x 12. There is minimal cutting of wood, or multiple measuring and marking as you screw in the premarked brackets. It is virtually mistake-proof. There is considerably less chance of squeaking than with conventional stairs. The universal stair bracket is more stable than conventional stringers. And, weight tests conducted by a major North American university demonstrated that our system far exceeded the 300 lb. minimum required in the U.S. For installation
JOIST HANGER 2x8
Value engineered for strength and economy. Speed prongs included for placement of hanger during installation. 20-gauge galvanized steel.
View Details
Value engineered for strength and economy. Speed prongs included for placement of hanger during installation. 20-gauge galvanized steel.
2x4 JOISTHANGER LU24
Value engineered for strength and economy. Speed prongs included for placement of hanger during installation. 20-gauge galvanized steel.
View Details
Value engineered for strength and economy. Speed prongs included for placement of hanger during installation. 20-gauge galvanized steel.
2x6 JOIST HANGER 20GA
Value engineered for strength and economy. Speed prongs included for placement of hanger during installation. 20-gauge galvanized steel.
View Details
Value engineered for strength and economy. Speed prongs included for placement of hanger during installation. 20-gauge galvanized steel.
*JOIST HANGER 2x10-14
Value engineered for strength and economy. Speed prongs included for placement of hanger during installation. 20-gauge galvanized steel.
View Details
Value engineered for strength and economy. Speed prongs included for placement of hanger during installation. 20-gauge galvanized steel.
3x3x1-1/2 ANGLE
Used to reinforce right angle connections. Fastens wood to wood. This product is made to help resist lateral forces. Great for home repair projects. 90 deg. angle. Galvanized steel. Some sizes available with ZMAX coating.
View Details
Used to reinforce right angle connections. Fastens wood to wood. This product is made to help resist lateral forces. Great for home repair projects. 90 deg. angle. Galvanized steel. Some sizes available with ZMAX coating.
2X1-1/2X1-3/8 ANGLE
Used to reinforce right angle connections. Fastens wood to wood. This product is made to help resist lateral forces. Great for home repair projects. 90 deg. angle. Galvanized steel. Some sizes available with ZMAX coating.
View Details
Used to reinforce right angle connections. Fastens wood to wood. This product is made to help resist lateral forces. Great for home repair projects. 90 deg. angle. Galvanized steel. Some sizes available with ZMAX coating.
50/BAG 1/2" PLYWOOD CLIP
Panel Sheathing Clips are used to brace unsupported panel edges when sheathing meets edge-to-edge without a rafter for support. Select the same size sheathing clip as the panel thickness. Keeps panels even for a level plain on the structure. Quick installation, no nails needed. Provides a 1/8" gap between plywood panels as recommended by the American Plywood Association. 20-gauge galvanized steel.
View Details
Panel Sheathing Clips are used to brace unsupported panel edges when sheathing meets edge-to-edge without a rafter for support. Select the same size sheathing clip as the panel thickness. Keeps panels even for a level plain on the structure. Quick installation, no nails needed. Provides a 1/8" gap between plywood panels as recommended by the American Plywood Association. 20-gauge galvanized steel.
6"x6" L-STRAP
Versatile utility strap. General reinforcement angles for L intersections. These connectors are strongest when used in pairs. Galvanized.
View Details
Versatile utility strap. General reinforcement angles for L intersections. These connectors are strongest when used in pairs. Galvanized.
6"x6" T-STRAP
Versatile utility strap. General reinforcement angles for T intersections. These connectors are strongest when used in pairs. Galvanized.
View Details
Versatile utility strap. General reinforcement angles for T intersections. These connectors are strongest when used in pairs. Galvanized.
12" STRAP/TIE
Designed for use on the edge of 2x members, with a nailing pattern that reduces the potential for splitting. They can be used where plates or soles are cut, at wall intersections, and as ridge ties. Galvanized steel.
View Details
Designed for use on the edge of 2x members, with a nailing pattern that reduces the potential for splitting. They can be used where plates or soles are cut, at wall intersections, and as ridge ties. Galvanized steel.
*1-3/8X2-13/16 ANGLE
Used to reinforce angle connections. Field adjustable (skewable) 0 deg. to 135 deg. angles. Bend 1 time only. Shipped at 45 deg. angle. 18-gauge galvanized steel. Also available with ZMAX coating.
View Details
Used to reinforce angle connections. Field adjustable (skewable) 0 deg. to 135 deg. angles. Bend 1 time only. Shipped at 45 deg. angle. 18-gauge galvanized steel. Also available with ZMAX coating.
1-13/16x5 TIE PLATE
The nail-on tie plate is used to reinforce wood-to-wood connections on flat members. This product is generally used in home repair projects. Holes are sized for 8d common or 8d x 1-1/2" nails. 20-gauge galvanized steel.
View Details
The nail-on tie plate is used to reinforce wood-to-wood connections on flat members. This product is generally used in home repair projects. Holes are sized for 8d common or 8d x 1-1/2" nails. 20-gauge galvanized steel.
3-1/8x7 TIE PLATE
The nail-on tie plate is used to reinforce wood-to-wood connections on flat members. This product is generally used in home repair projects. Holes are sized for 8d common or 8d x 1-1/2" nails. 20-gauge galvanized steel.
View Details
The nail-on tie plate is used to reinforce wood-to-wood connections on flat members. This product is generally used in home repair projects. Holes are sized for 8d common or 8d x 1-1/2" nails. 20-gauge galvanized steel.
HURRICANE TIE
Provides resistance to uplift and lateral forces. Designed to help counter the effect of high wind and seismic events on a structure. Used also for general tie purposes, strongback attachments, and as an all-purpose tie where 1 member crosses another. Install in pairs to connect 2x rafter to top plate. Some sizes available with ZMAX coating.
View Details
Provides resistance to uplift and lateral forces. Designed to help counter the effect of high wind and seismic events on a structure. Used also for general tie purposes, strongback attachments, and as an all-purpose tie where 1 member crosses another. Install in pairs to connect 2x rafter to top plate. Some sizes available with ZMAX coating.
1-1/2x3 NAIL STOP
Nail stoppers help prevent nails from piercing water pipes and electrical lines. Installed over utilities that pass through framing members. 16-gauge galvanized steel.
View Details
Nail stoppers help prevent nails from piercing water pipes and electrical lines. Installed over utilities that pass through framing members. 16-gauge galvanized steel.
1/2" PLYWOOD CLIP******
Panel Sheathing Clips are used to brace unsupported panel edges when sheathing meets edge-to-edge without a rafter for support. Select the same size sheathing clip as the panel thickness. Keeps panels even for a level plain on the structure. Quick installation, no nails needed. Provides a 1/8" gap between plywood panels as recommended by the American Plywood Association. 20-gauge galvanized steel.
View Details
Panel Sheathing Clips are used to brace unsupported panel edges when sheathing meets edge-to-edge without a rafter for support. Select the same size sheathing clip as the panel thickness. Keeps panels even for a level plain on the structure. Quick installation, no nails needed. Provides a 1/8" gap between plywood panels as recommended by the American Plywood Association. 20-gauge galvanized steel.
RETROFIT ZMAX POST BASE
Retrofit post base designed to reinforce existing posts and columns. Can also be used to reinforce new post base connections such as carports, patio covers, trellises, and other structures. When installed with CPS (composite plastic standoff) it meets a 1" post standoff code requirement. Can be installed on a post that is flush to a corner. Two post bases can be installed at away from edge conditions to fortify the post base connection to resist both wind and seismic forces. ZMAX finish protects base from exposure conditions in many environments.
View Details
Retrofit post base designed to reinforce existing posts and columns. Can also be used to reinforce new post base connections such as carports, patio covers, trellises, and other structures. When installed with CPS (composite plastic standoff) it meets a 1" post standoff code requirement. Can be installed on a post that is flush to a corner. Two post bases can be installed at away from edge conditions to fortify the post base connection to resist both wind and seismic forces. ZMAX finish protects base from exposure conditions in many environments.
ZMAX 2X RIGID CORNER TIE
Secures 2 wood members forming a 90 deg (degree) corner to a vertical post. This product is ideal for the construction of workbenches and storage shelving units. 18-gauge galvanized steel. Some sizes available with ZMAX coating. No RTC2Z: Install with 6-sd8 x 1-1/4" on post and 6-SD8 x 1-1/4" on joist or 6-SC9 x 1-1/2" on post and 6-SD9 x 1-1/2" on joist. No. RTC22Z: Install with 5-SD8 x 1.25" screws on post and 6-SD8 x 1.25" screws on joist. No. RTC24: Install with 9-SD8 x 1.25" screws on post and 11-SD8 x 1.25" screws on joist. No. RTC42: Heavy-duty. Install with 14-SD8 x 1.25" screws on post and 11-SD8 x 1.25" screws on joist or 14-16d nails in post and 8-10d x 1-1/2" nails in joist.
View Details
Secures 2 wood members forming a 90 deg (degree) corner to a vertical post. This product is ideal for the construction of workbenches and storage shelving units. 18-gauge galvanized steel. Some sizes available with ZMAX coating. No RTC2Z: Install with 6-sd8 x 1-1/4" on post and 6-SD8 x 1-1/4" on joist or 6-SC9 x 1-1/2" on post and 6-SD9 x 1-1/2" on joist. No. RTC22Z: Install with 5-SD8 x 1.25" screws on post and 6-SD8 x 1.25" screws on joist. No. RTC24: Install with 9-SD8 x 1.25" screws on post and 11-SD8 x 1.25" screws on joist. No. RTC42: Heavy-duty. Install with 14-SD8 x 1.25" screws on post and 11-SD8 x 1.25" screws on joist or 14-16d nails in post and 8-10d x 1-1/2" nails in joist.
